Engineering
Electrical Engineer Resume Examples and Writing Guide for 2026
An Electrical Engineer designs, builds, tests and maintains electrical systems that power and control factories, buildings and infrastructure, and makes sure they are safe, reliable, efficient and compliant with standards. The role combines circuit and panel design, PLC programming, power system studies, load calculation, cable and breaker sizing, protection coordination, grounding, commissioning and energy saving: turning a process requirement into drawings, calculations and working equipment, keeping downtime low and proving the result with measured numbers. This guide explains what the job involves, which skills employers check for, how to write a CV that passes ATS screening, and how to prepare for the interview.
What the role does
In practice, an Electrical Engineer starts from the process and load requirements of a project and turns them into a design package: load lists and load calculations, transformer and generator sizing, cable and breaker sizing, voltage drop and short-circuit checks, single-line diagrams, panel layouts, wiring diagrams and cable schedules in AutoCAD Electrical or EPLAN. They specify and review switchgear, motor control centers (MCC), variable frequency drives and control panels in line with IEC 61439, IEC 60364, NEC and the Vietnamese standards TCVN and QCVN, and they carry out protection coordination and arc flash studies in ETAP so that breakers and relays trip in the right order. They design grounding and lightning protection, power factor correction and harmonic filtering, and they measure power quality and energy use to find savings. They program PLCs and HMIs in Siemens TIA Portal, Mitsubishi GX Works or Allen-Bradley Studio 5000, write functional specifications and I/O lists and test logic before it goes to site. They supervise installation, run insulation, continuity and functional tests, lead factory acceptance tests (FAT) and site acceptance tests (SAT), manage punch lists and hand over as-built drawings and manuals. They enforce lockout tagout and electrical safety rules, support maintenance teams in fault finding and root cause analysis, and work with mechanical, process, procurement and safety colleagues and with contractors and utilities. Day to day they use AutoCAD Electrical, EPLAN, ETAP, TIA Portal, MATLAB and Simulink, Altium or KiCad for PCB basics, Excel, multimeters, power analyzers and oscilloscopes. They usually report to an Engineering Manager or Project Manager, and the role is common in manufacturing plants, industrial parks, EPC contractors, building services firms, utilities and automation system integrators.
Main responsibilities
- Prepare load lists, load calculations, transformer and generator sizing, voltage drop and short-circuit studies for new plants and expansions.
- Produce single-line diagrams, panel layouts, wiring diagrams and cable schedules in AutoCAD Electrical or EPLAN that follow IEC, NEC, TCVN and QCVN requirements.
- Size cables, breakers, contactors and drives and run protection coordination and arc flash studies in ETAP so that faults are cleared selectively.
- Specify, review and test switchgear, MCC and control panels, and supervise their manufacture and installation against drawings and standards.
- Program and test PLCs, HMIs and drives in TIA Portal, GX Works or Studio 5000, and write functional specifications and I/O lists.
- Plan and lead FAT, SAT and commissioning, close punch lists on schedule and hand over as-built drawings, test records and manuals.
- Measure power quality and energy use, correct power factor, reduce harmonics and propose energy saving projects with payback calculations.
- Enforce electrical safety, lockout tagout and grounding practices, support fault finding and root cause analysis, and train technicians and contractors.
Career path
- 10-3 yrsJunior Electrical Engineer
Drafts drawings, builds and tests panels, checks calculations and supports commissioning under supervision.
- 23-6 yrsElectrical Engineer
Owns the design or commissioning of a system or project, programs PLCs, runs load and cable calculations and works directly with contractors and customers.
- 36-9 yrsSenior Electrical Engineer
Leads electrical design for large projects, runs protection and power system studies, reviews the work of junior engineers and owns safety and quality on site.
- 49-12 yrsLead Electrical Engineer / Electrical Engineering Manager
Manages a team of engineers across several projects or sites, sets design standards, controls budget and schedule and advises customers and management.
- 512+ yrsHead of Engineering / Director of Electrical Engineering
Owns the technical strategy, standards, safety culture and delivery quality of all electrical work and works with executives and key customers.
Skills employers ask for
Hard skills
- Load calculation and power system design
- Build load lists, size transformers and generators, check voltage drop and short-circuit levels and design low and medium voltage networks.
- Cable and breaker sizing
- Select cables, breakers, contactors and overload protection by current, derating, voltage drop and fault level according to IEC 60364 and NEC.
- Protection coordination and arc flash studies
- Set relays and breakers for selectivity in ETAP, document time-current curves and reduce incident energy.
- Single-line diagrams and electrical drawings
- Produce clear single-line diagrams, wiring diagrams, layouts and cable schedules in AutoCAD Electrical or EPLAN with correct revision control.
- PLC and HMI programming
- Write structured logic in TIA Portal, GX Works or Studio 5000, set up drives and HMIs and test before site.
- Switchgear, MCC and control panel design
- Specify busbars, ratings, form of separation, heat dissipation and layout according to IEC 61439 and supervise panel building and testing.
- Grounding and lightning protection
- Design earthing systems and surge protection, measure earth resistance and follow TCVN 9385 and IEC 62305.
- Power quality and energy saving
- Measure load profiles, power factor and harmonics, then apply capacitor banks, filters and variable frequency drives with measured savings.
- Commissioning, FAT and SAT
- Plan test procedures, run insulation, continuity and functional tests, manage punch lists and hand over complete documentation.
- Electrical safety and standards compliance
- Apply IEC, NEC, TCVN and QCVN rules, lockout tagout, permit to work and safe working distances and keep inspection records.
Soft skills
Tools
Certifications
Open jobs right now
Latest Electrical Engineer jobs
CV examples
CV summary examples
Electrical Engineering graduate with 1 year in panel design and PLC programming, producing 85 drawings and cutting unplanned stops on 3 lines from 14 to 6 hours a month. Strong in AutoCAD Electrical, TIA Portal and load calculation, eager to grow toward Senior Electrical Engineer.
Senior Electrical Engineer with 8 years of experience in manufacturing, leading design and commissioning for a 3.200 kVA plant. Raised power factor from 0,86 to 0,97, cut utility energy use by 18% and holds the Siemens TIA Portal certification.
Electrical Engineering Manager with 13 years of experience, leading 9 engineers and 28 MVA of installed capacity per year. Reduced unplanned outage time from 36 to 14 hours a year across 12 sites and completed 95% of FAT and SAT on schedule.
Experience bullet examples
Drew and revised 85 AutoCAD Electrical and EPLAN drawings for 6 control panels, cutting drawing errors found at assembly from 9% to 2%.
Raised plant power factor from 0,86 to 0,97 with a capacitor bank and harmonic filters, removing about 420 million VND a year in penalty charges.
Cut utility energy use by 18% (640 MWh a year) by installing variable frequency drives on 22 pumps and fans.
Completed a protection coordination study in ETAP and reduced nuisance trips from 11 to 3 per year across a 22 kV and 0,4 kV network.
Designed and commissioned 26 control panels for 9 projects with every FAT and SAT completed on schedule.
Led electrical design for a 3.200 kVA plant expansion with 220 drawings, delivering 3 weeks ahead of schedule.
Cut changeover downtime by 30% on 7 production lines by standardizing PLC function blocks in TIA Portal.
Standardized panel templates in EPLAN, cutting drawing time per panel from 5 to 3 days and revision errors by 45%.
Verified earth resistance below 4 ohm on all 8 sites with a new grounding design.
Achieved zero lost-time incidents across 400.000 working hours with permit to work and lockout tagout.
How to write your CV
Lead with measurable engineering outcomes
Start bullets with the number that shows impact, such as power factor, downtime hours cut, energy saving, panels delivered, drawing error rate or FAT and SAT on schedule. An Electrical Engineer is judged on systems that work safely and efficiently, not on the number of tasks done.
Use the action, method, result pattern
Write each bullet as what you did, how you did it and what changed. For example, ran a protection coordination study in ETAP and cut nuisance trips from 11 to 3 per year. This shows technical judgment and the use of data.
State the scale of the system
Give the capacity in kW, kVA or MVA, the voltage level, the number of panels, drawings, sites or I/O points and the team size. Scale helps a recruiter judge the seniority and complexity of your experience.
Name the standards and tools you really used
Mention IEC 61439, IEC 60364, NEC, TCVN and QCVN where you applied them, together with AutoCAD Electrical, EPLAN, ETAP, TIA Portal, GX Works or Studio 5000. Standards and software are the first keywords that an ATS and a hiring engineer look for.
Show safety, commissioning and teamwork
Add examples of lockout tagout, incident-free working hours, FAT and SAT delivered on time and cooperation with mechanical, process and procurement teams or contractors. Safety and reliable handover show that you can be trusted with live systems.
Tailor to the job description and keep it short
Copy the exact keywords from the posting, for example PLC programming, single-line diagram, protection coordination, switchgear, commissioning and energy saving, so that the ATS can match your CV. Keep the CV to 1 page if you have under 5 years of experience, and never share confidential customer drawings.
Interview questions
TechnicalHow do you size a cable and a breaker for a 75 kW motor feeder?
How to answer: Calculate the full-load current, apply starting method, derating and installation method, check voltage drop and short-circuit withstand, then choose the breaker and overload setting. Give one example with real numbers.
TechnicalHow do you carry out a load calculation and select a transformer for a new plant?
How to answer: Build the load list with demand and diversity factors, add future growth, check power factor and starting currents, then select the transformer rating and impedance. Mention a project with kVA values.
TechnicalWhat is protection coordination and how do you check selectivity between upstream and downstream breakers?
How to answer: Explain time-current curves, short-circuit levels, relay settings and discrimination in ETAP, and describe one case where you fixed a nuisance trip.
TechnicalHow do you design grounding and lightning protection for a factory?
How to answer: Cover the earthing system type, soil resistivity, electrode design, equipotential bonding, surge protection and measurement of earth resistance, with reference to TCVN 9385 and IEC 62305.
TechnicalHow do you improve power factor and reduce harmonics in a plant?
How to answer: Measure with a power analyzer, size the capacitor bank with detuned reactors, consider active filters for harmonics and show the saving or penalty removed in numbers.
TechnicalHow do you structure a PLC program and prepare it for FAT and SAT?
How to answer: Describe modular blocks, naming rules, I/O lists, interlocks and alarms, simulation tests, a FAT checklist, version control and handover documents.
TechnicalWhich standards and safety practices do you apply when building and energizing a panel?
How to answer: Mention IEC 61439, IEC 60364 or TCVN 7447, NEC where required, QCVN 01:2020/BCT on electrical safety, insulation and functional tests, lockout tagout, permit to work and arc flash awareness.
BehavioralTell me about a time you found the root cause of a serious electrical fault or outage.
How to answer: Use the STAR method: describe the situation, how you collected data and isolated the fault, the fix, the downtime saved and the prevention action.
BehavioralDescribe a commissioning you delivered under tight schedule pressure.
How to answer: Explain the plan, priorities, coordination with contractors, how you protected safety and quality, the result in days saved and what you would improve next time.
BehavioralTell me about a time you disagreed with a production or mechanical team about a design decision.
How to answer: Show that you listened, used calculations and standards, offered options and kept the relationship. Avoid blaming the other team.
SituationalA customer wants to energize a panel before FAT is complete and the punch list is still open. What do you do?
How to answer: Explain the safety and warranty risk, review the open items by severity, propose a limited energization with a written agreement and a clear closing plan, and escalate to your manager where needed.
Frequently asked questions
What does an Electrical Engineer do?
An Electrical Engineer designs, builds, tests and maintains electrical systems. They calculate loads, size cables and breakers, draw single-line and wiring diagrams, design and test switchgear and control panels, program PLCs, run protection and power quality studies, lead commissioning and keep systems safe and compliant with IEC, NEC, TCVN and QCVN.
What is the difference between an Electrical Engineer, an Automation Engineer, a Maintenance Engineer and a Manufacturing Engineer?
An Electrical Engineer focuses on power distribution, panels, protection and electrical design. An Automation Engineer focuses on PLC, robots and control systems. A Maintenance Engineer keeps equipment running and reduces breakdowns. A Manufacturing Engineer improves production processes and layouts. The roles overlap, and many Electrical Engineers move into automation or maintenance leadership.
What is a good metric to show on an Electrical Engineer CV?
Use numbers that show engineering impact, such as power factor improved, downtime hours cut, energy saving in percent or MWh, panels and drawings delivered, system capacity in kVA and FAT and SAT completed on schedule. For example, raising power factor from 0,86 to 0,97 is stronger than saying you handled power systems.
Do I need a degree to become an Electrical Engineer?
A bachelor's degree in electrical engineering, electrical and electronics engineering, automation or a related field is the usual requirement. Most employers also look for 3 to 6 years of experience for an independent engineer role, and certificates such as TIA Portal, ETAP or EPLAN and electrical safety training can help if your degree is in another field.
How long should an Electrical Engineer CV be?
Keep it to 1 page if you have under 5 years of experience. With 5 to 15 years of experience, 2 pages are acceptable. Focus on system scale, standards, tools, results and safety, and remove routine tasks that any technician would do.
What should a junior Electrical Engineer CV include?
Include a short summary, internships or junior roles, projects such as a load calculation sheet, a PLC conveyor program or a PCB design, and your tools (AutoCAD Electrical, TIA Portal, Excel, KiCad). Add English level, relevant coursework such as power systems and PLC control, and any safety or PLC certificate, with numbers wherever possible.
Which should I learn first: PLC programming, AutoCAD Electrical or power systems?
Start with electrical fundamentals, safety and basic power calculations, because they decide whether a design is correct. Then learn AutoCAD Electrical or EPLAN for drawings and TIA Portal or another PLC platform for control, and add ETAP and power quality later. Show each skill with a real project and a measurable result.
Related roles
Build your Electrical Engineer CV in minutes
Start from an ATS-ready template, let AI improve your bullets, then score your CV and practise the interview out loud.